Evoeater's Torque "MONSTA"

[javasti2004]

wait another 5 months to put them in and you would still have his other builder beat

[02wrxman]

very nice cant wait to see more updates

[Evoeater]

Car is running and well..I will post some pictures when I get home tonight. A video of idle will be posted as well. :D

[hiprsha666]

very nice!

[Demetry]

I believe I am the only one to see/hear this car running. Lucky me :)

[Bu11dogg2]

tease

[Evoeater]

Besides the video I will post later everyone can see/hear it at the next meet!

[02wrxman]

great to here that its back and runing man cant wait for the vid

[Berge56]

:spin:

[Evoeater]

I have to get inspected this week then maybe someone will spot me for once

[ScottyBallistic]

Now we need to get Ben to start his .. LOL . Bens had his motor for a few weeks and you only picked yours up Saturday night ( 9pm service , got to love it :) )

[Evoeater]

Now we need to get Ben to start his .. LOL . Bens had his motor for a few weeks and you only picked yours up Saturday night ( 9pm service , got to love it :) )
:wub:

[ScottyBallistic]

Where is that vid :D

[98Wagoon]

^^that :unamused:



we the people of new england subaru's DEMAND a vid! :lol:

[Antihero]

^^that :unamused:



we the people of new england subaru's DEMAND a vid! :lol:
X2 NOW.
:D

[Evoeater]

Vid is uploading as I type this to Youtube!!!!!:devil:

[Evoeater]

Here's the video I was having issues with Youtube but will get it up on youtube ASAP in HD


http://www.facebook.com/video/video.php?v=10150147352394735

[04Wagoon]

Blocked at work.....

[arcadia25]

I haz no facebook! give me youtube!

[02wrxman]

very nice love the vid

[fearnoevo]

Holly $h!* it sounds so f*#*#*# mean ... I need to go change my pants now .. Nasty can't wait to see it in action at the track !!

[Berge56]

waiting for youtube link.

[Evoeater]

YOUTUBE VIDEO OF THE IDLE FOR EVERYONE!!!!:devil:

http://www.youtube.com/watch?v=WrRuT4Y9xmc

[04Wagoon]

sounds wicked nice. love it.

[98Wagoon]

holy hell ray it sounds amazing!

[brian]

Wow! Sounds like you'll be getting pulled over as much as me! Lol
Awsome man. Can't wait to hear it in person

[hiprsha666]

Holy **** that sounds good. Can't wait to see some dyno vids!

[25rSTI]

B-U-T-FULL!!!!!

[javasti2004]

jelious i want a ride in it!

[Berge56]

sweet. Now get some muiles on her so she can be dyno'd! :)

[arcadia25]

it sounds so angry!

[DHGurs]

Your car sounds amazung Ray!

[Demetry]

ray, it may be time to modify or swap out that muffler so it sounds like this a lot of the time. Or..install a QTP electric exhaust cut out. I think that would be nice to have for when those v8's pull up next to you. lol.

[jwebsta32]

that is one angery sounding subrau

[squeethebee]

I agrie, sounds mint.

ed

[Evoeater]

Hahaha thanks guys!! I need to get an N1 style axle back to swap to for track days or when I just want to be obnoxious lol

[Evoeater]

22.6 miles so far lol

[02wrxman]

very nice ray:up: doing better then me mpg 18 :(

[javasti2004]

take me for a ride ray!...i wana ride in the car too...

[- RACH -]

Daaaaaaamn sounds nasty!!! :D

[Evoeater]

Thanks for the comments!! Don't forget to Nominate/Vote for me in ROTM:D

[02wrxman]

i will be thats for sure ray :up:

[Evoeater]

At my uncles inpection station.....my uncle was not happy...he better pass it :unamused:

[Shiux]

Voting for you for ROTM for sure!

Are you going to represent NES during the 1/4 mile challenge with turboOptions.com?

[Evoeater]

I will be going but will unfortunately not be able to run. I am currently breaking the motor in and if it passes inspection will depict how long the process will take along with me gathering parts before I schedule a new tune.

[Johnsea]

Ya that's awesome totally using 272s in my motor build, sounds so good man!

[Evoeater]

Ya that's awesome totally using 272s in my motor build, sounds so good man!

Do it!! It sounds soo sick but you dont need to believe me;)...im excited to use them with the rotated setup!

[hiprsha666]

how did the inspection go?

[Evoeater]

I passed....got an earful for the exhaust but it passed lol

[hiprsha666]

nice!

[Evoeater]

I really want just an N1 axle back to put on for track stuff because the louder exhaust sounds sooo good with the cams...Someone help me out!!!!

[arcadia25]

ride of the month needs some photos and a mod list from you for that sickly sounding car of yours!

[apkarian100]

EbayyyyyyyyyyI really want just an N1 axle back to put on for track stuff because the louder exhaust sounds sooo good with the cams...Someone help me out!!!!

[Evoeater]

ride of the month needs some photos and a mod list from you for that sickly sounding car of yours!

I need to setup a time with Matty but until then thats what I have up there...I will however go and take a photo of the engine bay for everyone!!:D

[ScottyBallistic]

Deciding if I should bust your balls or not .. LOL

[Shiux]

Do you have a larger pic of your avatar? That would make a good ROTM pic!

BTW, your build makes me want more than just 300whp... you jerk!

[javasti2004]

Deciding if I should bust your balls or not .. LOL

you must do it!

Do you have a larger pic of your avatar? That would make a good ROTM pic!

BTW, your build makes me want more than just 300whp... you jerk!


and he should i sent him the original of it

[Evoeater]

Updated the OP with an engine bay pic from my cell until I get some professional ones..

[javasti2004]

the mcdonalds mobile

[Evoeater]

the mcdonalds mobile

Hey Perrin liked it...Updated the photos with the best I have...:D

[javasti2004]

what do you think ull get for wheel hp and torque now?

[Evoeater]

Im gunning for early 400hp range...remember im going rotated

[Evoeater]

Should be doing a little photoshoot with Matty in the next couple nights:D

[-III]

:spin:

I need new pics as well

[Evoeater]

New vid again with axle back removed but in daylight and with revs!! :D

http://www.youtube.com/watch?v=iKFePhU7I3U

[hiprsha666]

Sounds ****ing dirty, nasty, awesome!!!!!

[yaya]

Sounds gnarly.

[BigRod]

Eight strokin like a mofo! Awesome! Lets hear some wot pulls!

[Evoeater]

Eight strokin like a mofo! Awesome! Lets hear some wot pulls!

HAHA that will have to wait until its tuned and broken in on the new setup...but trust me they will come!!

[Evoeater]

250 miles and going.....

[Evoeater]

Photoshoot with Matty scheduled for Wed!!!! Pics up soon after...:D

[javasti2004]

what time?

[Evoeater]

I guess we will do the photoshoot tomorrow...damn rain:mad:

[Antihero]

It might rain tomorrow as well, just sayin'.

[Evoeater]

It might rain tomorrow as well, just sayin'.


Shhh.. says 62 and sunny :D

[RCKSTR]

http://www.newenglandsubarus.com/forums/showthread.php?t=19345

:hide:

[Evoeater]

But...But...my setup isn't finished....

[Evoeater]

Weather is looking mighty fine!!

[Evoeater]

Big thanks goes out to Matty for taking these great pics!! He stuck it out in the breezy cool weather thanks again bud!


http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0104-2.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0101-6.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0100-5.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0098-5.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0097-3.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0091-3.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0086-3.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0084-3.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0077-2.jpg

[Evoeater]

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0075-2.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0074-2.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0071-5.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0070-1.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0063-3.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0062-1.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0055-1.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0054-3.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0051-4.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0050-1.jpg

[Evoeater]

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0046-3.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0044-2.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0042-3.jpg

http://i446.photobucket.com/albums/qq189/MattMusto/DSC_0103-3.jpg

[RCKSTR]

****ing beautiful pictures you've got right thur :up: they came out great and I love the new windshield banner :wub:

[hiprsha666]

Pics look awesome dude. :up:

[DHGurs]

Wow those are some great shots Matty! Car looks good as always Ray.

[Matty]

thanks guys!

It's a beautiful car Ray. I'm pleased with the way these pics came out and im glad to see that you like them.

[arcadia25]

those pics are ****ing awesome man!

[brian]

No shots of the motor???
Pics look great matty, cars looking good raymoondo. Any idea when that beast is getting tuned?

[ScottyBallistic]

Pics came out great Matty.....

[Demetry]

Nice ballistic decal and pics are what I expect from Matty. Job well done.

[Berge56]

fantastic shots mang! :shots:

[Evoeater]

Thanks guys!! Appreciate it but couldn't have happened without Matty and his skillz

[Evoeater]

500 miles and going lol Slow but steady...

[Evoeater]

Don't forget to vote in ROTM (http://newenglandsubarus.com/forums/showthread.php?t=19573)!!




Also I need a A/F o2 sensor for the car:( second one in less than a year:mad:

[Evoeater]

Still working on figuring out wether it is the o2 sensor or not..the 02 sensor checked out fine on the bench test..tomorrow I will play around some more....car hasn't moved in a week :(

[ScottyBallistic]

Just get a Dahm sensor. Lol

[Evoeater]

I'm trying to get the car up and running for the meet...going to fix it tomorrow hopefully

[Evoeater]

o2 sensor is ordered and will be here monday! Hopefully that will fix the issue...

Don't forget to vot for ROTM!

[Demetry]

voted

[Evoeater]

voted

:squee:



Today I used Cobb's new program that converts pro tunes into allowing LC and FFS if they didn't have it already....tested it out in the garage....:devil:..Can't wait to test it out at the track this summer to see if it makes a noticeable difference on the new setup!! Monday the break in continues once I get the o2 sensor.



OOO and don't forget to vote in ROTM!!! Only a few hours left!!

[RCKSTR]

Are you swinging this by SM5 or is it parked till the O2 install happens?

[Evoeater]

Parked until Monday unfortunately...:( But I will be there with Demetry.

[Evoeater]

O2 fixed the issue now just need to tune it to get the little gremlins out...Tomorrow I will play with it again to learn idle a little better with a cold start.

[yaya]

Did the new sensor fix the issue?

[Evoeater]

Did the new sensor fix the issue?

Yes but because I haven't tuned it with the things I changed with the new build it runs a bit rough. I am going to tune it next week to get things back to normal so I can comfortably break it in and drive it while I figure out which rotated turbo I go with..

[Berge56]

Sweet man. ... Glad it was an "easy" fix.

[Evoeater]

Sweet man. ... Glad it was an "easy" fix.

Thanks I dragged it out longer than I should have but I just couldn't believe a brand new sensor would crap out like that....

[ScottyBallistic]

Yo ... Stranger . You get the miles on it yet ?? When is it going for the tune ?

[DHGurs]

According to his thread on the other site, he's getting tuned tomorrow. :bacon:

[ymhrid2]

incredible car man. I got a question for ya? I know its a whole different ballgame with the brembos, but do you like the HPS pads? I thinkin of getting some for mine.

[Evoeater]

Got tuned go back in a week to tune using my meth system. For whatever reason my flow sensor wasnt working and although the system was injecting we felt it saver to get the flow sensor situated first. Also going to be running two M6 injectors.

My addiction......
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/246670_10150204557654735_690994734_7179229_1545824 _n.jpg

As for the HPS pads I like love them for daily use with occasional heavy braking but would prefer something a little different for AutoX.

[ScottyBallistic]

I dont care about no stinking other sites :)


Ray give me a buzz when you get a chance :D

[Berge56]

What did you make for power?

[hiprsha666]

What did you make for power?

[DHGurs]

Power, how much was made?

[Evoeater]

315 at 19psi target AFR really rich at 10.X. This is just for this week until the flow sensor is replaced/fixed.

[hiprsha666]

Nice. Look forward to seeing the final tune.

[ScottyBallistic]

getting there .. getting there . Cant wait till you can turn it up. From what I hear Ashley has ya beat and her ECU is holding her back ;) . Better get that flow sensor fast :D

[Evoeater]

getting there .. getting there . Cant wait till you can turn it up. From what I hear Ashley has ya beat and her ECU is holding her back ;) . Better get that flow sensor fast :D

Not for long my friend....not for long.....:devil:

[Evoeater]

UPDATED the OP with my new tuner Alex of AWTuning.. Great guy....great tuner and I look forward doing future business with him :D

[DHGurs]

What? Que? Qui?

Is that "Overboost" Alex?

[Evoeater]

What? Que? Qui?

Is that "Overboost" Alex?

Correct!! Needed someone local to figure out any issues and since I am always changing things I dont feel like traveling far. He has alot of experience with multiple shops and tons of different setups...to sum it up he knows his stuff and he showed me last Sunday. Plus it gives me a chance to see his sick Supra....:wub:

[Evoeater]

Scott at Ballistic recommended him since he does a lot of unique setups for his shop not just Subaru. My car needs someone that will take the time to get everything to work and run similar to OEM. I now understand why he recommended him.

[ipassu]

AWtuning did my car alex is a great guy and his supra is just pure sexy!!!

[OVRBST]

We left it conservative for the time being. A meth system that's not indicating correctly has to be considered inoperative. For that reason the car sits around 19psi with very conservative timing and a pump-gas-rich afr. Now that its all working its time to make power ;). See you Sunday!

[Berge56]

in for final numbers

[RCKSTR]

You bringing this pig to WBM?!?

[Evoeater]

You bringing this pig to WBM?!?

Up in the air at the moment...it happens to be my brothers and sisters graduation...50+ people

[hiprsha666]

graduation of siblings happen a couple times in your life, WBM is once a year.


With that in consideration, you should go to WBM.

[Evoeater]

graduation of siblings happen a couple times in your life, WBM is once a year.


With that in consideration, you should go to WBM.

:rofl:

[Evoeater]

Update: Currently have 2,600 miles on new motor with 4 trips to Hurricane Mtn Rd. Runs smooth(or as best as it can with cams) and I have only lost an 1/8 of a quart of oil...Ballistic Motorsports FTW!!

Tune: As for turning up the Boost and tuning for meth, I am working with a busy schedule and it may happen next weekend if Alex can make enough time otherwise it will be Aug. 23..Updates to follow.

[Shiux]

Pics, video, whore thos beast put!

[Berge56]

Nice mang! How do you like the cams?

[hiprsha666]

Cool, it should be a beast.

[Evoeater]

Nice mang! How do you like the cams?

Great the sound is the only difference I have noticed so far haha But once we turn the wick up a bit the added rpm potential and the abilityto make more power made up top with a larger turbo will be nice.

[Berge56]

You turn the power up yet??

[ScottyBallistic]

You turn the power up yet??


X100 .... Your Slacking Ray

[Evoeater]

Car gets dropped off Friday at Granite State Dyno (http://granite-state-dyno.com/) for Alex to tune..sorry I have been really busy lately havent had a chance to do anything with the car... :(

[Berge56]

:ay:

[thelastmaine]

I might see your car there! alex is going to have his hands full with subys

[Evoeater]

I might see your car there! alex is going to have his hands full with subys

Nice!! Car gets dropped off tonight. Unfortunately I wont be able to see him work his magic. :( I have to work for a bit. Hopefully all goes well without any hitches...

[Berge56]

updates on the tune? :munch:

[Berge56]

Bump

[ScottyBallistic]

348/377 @23psi on a 18g

310/310 @ 18psi

[Berge56]

348/377 @23psi on a 18g

310/310 @ 18psi


**** I hate my crappy 18g.


Congrats on the power!

[Evoeater]

**** I hate my crappy 18g.


Congrats on the power!

Thanks! Just remember that was with a 75/25 mix of meth...literally the poor guy cant puff any more than that. We tried many times and it would actually make less power with more boost(we went as far as 29psi). These numbers could be higher if wanted but this was heat soaked after some 44 pulls between 7pm-11pm haha. Also I NEED a BIGGER TURBO ASAP because just as the turbo falls off my cams pic up...:(

[Berge56]

ah yes....meth will do that. Still great numbers for a 18g.

[Evoeater]

Updated Mod list with Darton Sleeves and Cosworth headgaskets

[vtbimmer]

:up: Love it!

[Berge56]

Nice! That should be able to hold some power.

[Evoeater]

Yeah unfortunately in preparation for the track I managed to crack a sleeve. Being at the bore limited in the first place and added psi past intended design is what led to it im sure. O well should be good to go in a month or so. I broke it back in November thinking it was a headgasket.

[Typical Tom]

:like:

[Berge56]

Anything new to report?

[DHGurs]

I don't think it's together currently... :shrug:

[scubby snack]

love this car. hope the rebuild goes well

[Evoeater]

Sorry guys..Haven't started on it yet but should in the next couple weeks I have been busy

[Demetry]

status?

[apkarian100]

What is a Torque Monsta?

:troll:

[Evoeater]

Engine is currently at Larry's Auto Machine in Groton Connecticut have AEBS sleeve installed and everything checked out. Should know more in a couple weeks.

[Berge56]

Engine is currently at Larry's Auto Machine in Groton Connecticut have AEBS sleeve installed and everything checked out. Should know more in a couple weeks.


Awesome shop! Good luck with the rebuild. Are they reassembling the shortblock too?

[scubby snack]

Engine is currently at Larry's Auto Machine in Groton Connecticut have AEBS sleeve installed and everything checked out. Should know more in a couple weeks.
im using them right now also on my rebuild, love your car, we have twins lol

[Evoeater]

They will be assembling the shortblock. I told them my goals and they insisted it be done they're way. I can't argue since they build and machine more blocks then anyone else..haha I looking to have it back sometime they end of this month or beginning of May.

[Evoeater]

im using them right now also on my rebuild, love your car, we have twins lol

Nice I am sure I saw it...somewhere with the 15 others lol Good guys I met them all.

[Berge56]

And their shop is so clean! Could eat off the floor in that place.