View Full Version : III's 2003 WRX - "Stage 2" + Grimmspeed solenoid
BG @ BrenTuning
09-22-2010, 02:47 PM
2003 WRX
Custom Intake
GrimmSpeed EBC
Catless up/downpipe
3'' catback
Power reading: Virtual Dyno
Octane: 93
Temperate: 65 degrees
Boost: 17.5 psi to 14 psi taper
Launch Control: Yes :spin:
Due to the cool temps this night the car was able to put out some higher numbers then what I am used too on this setup. Delta weight was just the driver and myself. Numbers were high enough that I went back and re-did the runs a few times. Car is going to need a fuel pump (Getting replaced asap) as there were some fuel inconsistencies from time to time and then we will adjust the tune.
http://img.photobucket.com/albums/v412/brenwrx/WRXSTG2SOLENOID.jpg
squeethebee
09-22-2010, 03:02 PM
This graph makes me very happy, nice and linear.
ed
shtbxr22
09-22-2010, 03:41 PM
bet it feels like a whole new car. :D good job, once again.
It feels awesome:devil:
Just need to get a few parts for a re-tune.
Antihero
12-01-2010, 03:02 PM
will I be able to beat this with a similar set up but with a catted downpipe, and a walboro already installed?
BG @ BrenTuning
12-01-2010, 03:36 PM
will I be able to beat this with a similar set up but with a catted downpipe, and a walboro already installed?
We can see, each car is a little different at this age based on overall health.
Nick's wagon made higher numbers but he has a FMIC/walbro/ebay header.
Antihero
12-01-2010, 03:56 PM
cool. I have the fuel pump and Grimmspeed EBCS ordered and on its way, and I'll be installing a 2004 STI uppipe this week.
I'm hoping to be able to call you soon to set something up :D
After I get my APS 65mm on I will be wanting a retune, only problem is a suspended license and I got locked out of my Yahoo mail
BG @ BrenTuning
12-02-2010, 11:34 AM
cool. I have the fuel pump and Grimmspeed EBCS ordered and on its way, and I'll be installing a 2004 STI uppipe this week.
I'm hoping to be able to call you soon to set something up :D
Just call or email for best response :D. We've been very busy and not on the forums as much moving into our new shop.
Got the Walbro and front o2 sensor a few months back, and an APS 65 on there too. Need to come back for another tune. I want some more torque (closer to the 270 range), anything I should look into before coming back?
BG @ BrenTuning
01-11-2011, 09:37 AM
Intercooler or header. But both will slow throttle response and shift power to the right.
Torque peak isn't a number id chase. Look into broadening the curve with a vf or bigger. Much more enjoyable.
BG
g20sleeperjdm
01-11-2011, 09:39 AM
the grimmspeed ebs rocks! nice job on the tune as always bren
Have a line for a JDM intercooler. Not sure I want to do headers. But I am looking at turbos.
vBulletin® v3.8.3, Copyright ©2000-2012, Jelsoft Enterprises Ltd.