BugeyeBoost
11-11-2010, 09:06 PM
After owning my 02 wrx for 4 years i decided it was time for it to go. I sold it in the spring for a really low price and if I could go back in time I would have never of let her go :( (The current owner is apart of this forum)
A month after i sold my Wrx i bought a 04 wrb sti with 58,000 miles. I have big plans for this car in the future so i decided to start a thread. I havnt changed anything on my car yet however I have been collecting some parts and plan on getting started real soon.
This is how my car sits as of now
Engine:
Ultimate racing t3/t04s turbo kit (grimmspeed powdercoat)
Ultimate Racing Cat-less Uppipe (ceramic coated)
Ultimate Racing 3” Cat-less Downpipe(ceramic coated)
Ultimate Racing External Wastegate dump tube/pipe
Tial 38mm wastegate
Ultimate Racing Cold Air Intake(65mm)
Borla Headers (ceramic coated)
Borla Hush cat back (3" dual tip)
Hyperflow TMIC
Grimmspeed port/polish intake manifold(Grimmspeed powdercoat)
TGV delete (Grimmspeed port/polish)
XX Tuning fuel rails
Helix 860cc injectors
Forge coolant tank
Aluminum racing oil cap
JDM radiator cap
Turbosmart bov
AEM Meth inection:D
Spec stg3 clutch
Exterior:
Rota rims
2007 STI tail lights
drilled/slotted rotors
Interior:
2007 STI shift knob
Pioneer Amp
Pioneer Flip out head unit
Alert two way pager alarm system
Apexi 60mm boost gauge
Was tuned at ECS dont have a dyno sheet but I was told it made over 450hp
After I bought it I had it retuned by Chris at EFI Logics. It baselined 382hp and 350ftlb @23psi
Final results were 400hp 372ftlp @23psi (maf is maxed out)
Parts I have waiting to install:
APS dr725 fmic (stealth)
Ultimate racing retrofitted intercooler pipes
Tial 50mm BOV
KS Tech 83mm MAF
Crawford air/oil seperator
trying to find a used Invidia N1 race
Built shortblock(cp 100mm pistons,eagle rods,acl main/rod bearings)
In the spring I hopefully will be getting rota 18by9 g forces and coilovers etc
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/stifrontshot.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/stisideshot.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/stienginenoseshot.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/get-attachment-7aspx.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/get-attachment-5aspx.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/get-attachment-6aspx.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/meth.jpg
PLEASE EXCUSE MY SPELLING AND GRAMMAR :)
A month after i sold my Wrx i bought a 04 wrb sti with 58,000 miles. I have big plans for this car in the future so i decided to start a thread. I havnt changed anything on my car yet however I have been collecting some parts and plan on getting started real soon.
This is how my car sits as of now
Engine:
Ultimate racing t3/t04s turbo kit (grimmspeed powdercoat)
Ultimate Racing Cat-less Uppipe (ceramic coated)
Ultimate Racing 3” Cat-less Downpipe(ceramic coated)
Ultimate Racing External Wastegate dump tube/pipe
Tial 38mm wastegate
Ultimate Racing Cold Air Intake(65mm)
Borla Headers (ceramic coated)
Borla Hush cat back (3" dual tip)
Hyperflow TMIC
Grimmspeed port/polish intake manifold(Grimmspeed powdercoat)
TGV delete (Grimmspeed port/polish)
XX Tuning fuel rails
Helix 860cc injectors
Forge coolant tank
Aluminum racing oil cap
JDM radiator cap
Turbosmart bov
AEM Meth inection:D
Spec stg3 clutch
Exterior:
Rota rims
2007 STI tail lights
drilled/slotted rotors
Interior:
2007 STI shift knob
Pioneer Amp
Pioneer Flip out head unit
Alert two way pager alarm system
Apexi 60mm boost gauge
Was tuned at ECS dont have a dyno sheet but I was told it made over 450hp
After I bought it I had it retuned by Chris at EFI Logics. It baselined 382hp and 350ftlb @23psi
Final results were 400hp 372ftlp @23psi (maf is maxed out)
Parts I have waiting to install:
APS dr725 fmic (stealth)
Ultimate racing retrofitted intercooler pipes
Tial 50mm BOV
KS Tech 83mm MAF
Crawford air/oil seperator
trying to find a used Invidia N1 race
Built shortblock(cp 100mm pistons,eagle rods,acl main/rod bearings)
In the spring I hopefully will be getting rota 18by9 g forces and coilovers etc
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/stifrontshot.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/stisideshot.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/stienginenoseshot.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/get-attachment-7aspx.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/get-attachment-5aspx.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/get-attachment-6aspx.jpg
http://i614.photobucket.com/albums/tt230/birkins003/04%20sti/meth.jpg
PLEASE EXCUSE MY SPELLING AND GRAMMAR :)