Project: No Rice

[Berge56]

:troll:

[1982gl4]

Good thing race wars isn't coming up. I hear they pull a premium around then.

:rofl:

[RCKSTR]

SR20 motors always pull a premium :lol:

thank god I'm staying BR :)

[jwebsta32]

big retard?

[Shiux]

Why stay RB when you could go VQ?






:troll:

[98Wagoon]

Vq35dett ftw

[GeoffC8]

^No.

RB for life.

[RCKSTR]

big retard?
I am a Big Retard :palm:

Why stay RB when you could go VQ?






:troll:

because it's already wired in and I already gots the mounts and driveshaft... ;)

[Berge56]

SR or BUST!

[jwebsta32]

WOO RB FTW

[yaya]

RB26!

[RCKSTR]

RB26!

I wish :wub:

[RCKSTR]

2 things happened in regaurds of this car today, first being my car now has 100,000 miles :eek:

second thing is now it'll have more ewg soon... :troll:

[Seraphinwolf]

I see what you did... "PM sent"... Did you ever have it setup with an EWG setup before?

[RCKSTR]

This will be my first

[Seraphinwolf]

:up: Horray for better boost management!

[Berge56]

Nice Justin. You will be happy with that setup.

[RCKSTR]

Nice Justin. You will be happy with that setup.

I've wanted EWG forever... and ever...

http://i59.photobucket.com/albums/g297/sh8kspeer/OMFGBBQ.jpg

Now just need to purchase a few gaskets and schedule a tune :troll:

[Berge56]

So when are you coming down to install those parts?

[RCKSTR]

So when are you coming down to install those parts?

I have to see when I can get in for a tune, also debating on getting the grimmspeed electronic boost solenoid or just using either the stock one or the manual boost controller that I already have. not sure which route to take...

[arcadia25]

EWG!!!!

[RCKSTR]

OMFGBBQ :eek:

I have next weekend off so I think I'm taking decals off... EWG will be in a few weeks :spin:

[Berge56]

WOOT!! What about doing a hybrid boost control setup? Keep your stock setup and use the manual boost controller.

[Andrew3776]

Just an FYI, that dumptube uses the same thread size as your hood bolts. Thats what I had it installed with but I put them back on the car. ;-)

[RCKSTR]

Now trying to decide what else I want to install/purchase before the tune happens... Stay vf or go bigger? That'd mean injectors too then and possibly rails...

[arcadia25]

BIGGER!!! If you can afford it. :lol: cause i know i cant

[Seraphinwolf]

Do injectors anyways?

[hiprsha666]

When are you going to blow your motor like the rest of us cool kids?

[Berge56]

rails won't be needed Justin. Just get some DW 750's and you will be fine.

[RCKSTR]

yaya told me to do diy rails so I'm gonna, got other things in mind aswell. Just remembered a friend of mine can weld soda cans so maybe pipes...

[RCKSTR]

When are you going to blow your motor like the rest of us cool kids?

Not anytime soon I hope :lol: it's not in the budget!

[Berge56]

word sounds good. yaya and I have a done a couple of DIY rails. :)

[RCKSTR]

Anyone in the market for a vf39 :troll:

[Andrew3776]

How much?

[Psychoreo]

Anyone in the market for a vf39 :troll:

I'll take it for $free.fiddy

[RCKSTR]

How much?

I'll take it for $free.fiddy

Not sure how much, its in perfect working order right now and when it went on it didn't have the "wastegate crack". I'm going to figure out pricing after its off and I can inspect it :spin:

[Berge56]

:orly:

[RCKSTR]

Has anyone else come across a better way of mod'n the oe fuel rails?

This is the best link I've found.

http://forums.nasioc.com/forums/showthread.php?t=1462667

I'd have to pick up a STi FPR in order to go that route, wasn't sure what others have seen done :shrug:

[98Wagoon]

North ursalia's got one..


http://www.northursalia.com/modifications/drivetrain/fuelrail/fuelrail.html

[RCKSTR]

North ursalia's got one..


http://www.northursalia.com/modifications/drivetrain/fuelrail/fuelrail.html


Thats for the old rails, found that same link/info but from nasioc. Their FPR is different also, thanks though mang :up:

[yaya]

You could go with an aftermarket adjustable fpr and and adapter for the passenger side rail. But, you'd need a way to set the base fuel pressure (ie gauge on the fpr).

[98Wagoon]

Thats for the old rails, found that same link/info but from nasioc. Their FPR is different also, thanks though mang :up:

:sadpanda:

[Seraphinwolf]

Go all out on a nice quality RRFPR, rails, and SS lines? Just make your own lines and Zero Drift on RS25 has started making rails. $135 for a pair of rails. That's likely what I'm going with for rails, use the SARD RRFPR I have, and make my own lines.

[Seraphinwolf]

I have a few FPR's kicking around if interested I can let you know what I have?

[yaya]

Go all out on a nice quality RRFPR, rails, and SS lines? Just make your own lines and Zero Drift on RS25 has started making rails. $135 for a pair of rails. That's likely what I'm going with for rails, use the SARD RRFPR I have, and make my own lines.

I think he's trying to keep the costs down, hence the use of oem rails. :dunno:

You can also get a set of bnib Aeromotive rails on ebay for $159. But the lines and the fittings to set it up is where it gets really expensive.

[Seraphinwolf]

^This about the lines and fittings... I'm I'm the process of hunting for best option for lines. I can forward something if you want once I sort it out for my own cars.

[Berge56]

The lines are what cost me the most when I did my setup.

[yaya]

I'm currently doing a set myself. ;)

anplumbing.com has been pretty reasonable, compared to some of the big online stores.

[RCKSTR]

Still unsure of rail setup, may wait and see what tax money brings...

only things needed to get car tuned are injectors, gaskets and rails I believe. May still get an accessport...

[Seraphinwolf]

Accessport equals speed density tuning provided there is a MAP to read from.

[Shiux]

Only NOOBS have accessports!

but seriously, I was always under the impression that it was a waste of money, as you are going to end up going to a shop at some point anyways... right?

[Seraphinwolf]

Accessport cost same in the long run and you can store ad change multiple maps. If you need a new touch up tune you can just log and hand the files to your tuner and they can email back a refreshed tune. Also there are handy little things of having the AP like locking out the car from starting without it or pulling codes and doing other logging.

[yaya]

Accessport equals speed density tuning provided there is a MAP to read from.

Not on a 16 bit ecu. 06+ WRX.

[98Wagoon]

The idea of sending off a map for a "refreshed update" without the tuner getting to physically see hear and feel how the car is running, along with actually looking at all the tables/afr/etc that he's logging right then and there, not last week when you took the log for him makes me feel much safer with a proper protune than an AP. If you need to pull/clear codes and want to see stupid things like intake temps etc etc get a scangauge. If yr that worried about immobilizers in the car for the crims and baddies then get a Turbo timer that immobilizes and has a code like the one my brothe had in his wrx.

[RCKSTR]

I'm getting a AP for the reason of a protune since I want maps for with or without meth :troll:

gonna see what this motor can take...

[Berge56]

:mog:

[Subyspeed]

:eek:

[Seraphinwolf]

Ignore Wagoon... He'a just cranky cause he sold his hopes and dreams for $50 down a dirty ally way...

[RCKSTR]

Ignore Wagoon... He'a just cranky cause he sold his hopes and dreams for $50 down a dirty ally way...

:lol:

[Subyspeed]

:lol:

[RCKSTR]

Ok so AccessPort is being shipped tomorrow from Texas, now I'm also thinking of going with a name brand fmic...

I'm thinking APS...

[My Name]

Ok so AccessPort is being shipped tomorrow from Texas, now I'm also thinking of going with a name brand fmic...

I'm thinking APS...


APS FMIC so sexy. good luck finding one.

[Berge56]

I love my APS FMIC!

[RCKSTR]

They don't make them anymore do they...

[My Name]

From what I hear is that they still make them but APS no longer imports to the U.S.

[RCKSTR]

I just check my main vendors sites and none have it listed :sadpanda:

They all have the Perrin kit available.

[yaya]

I don't think your fogs will work with Perrin. Find a used APS!

[Berge56]

Used aps front mount kits can be found.

[98Wagoon]

Ignore Wagoon... He'a just cranky cause he sold his hopes and dreams for $50 down a dirty ally way...

Jerks and fanboi's made me hate my own car. :shrug:



But I had a point.. haha.

Also.. I'm more expensive than that..

[RCKSTR]

Jerks and fanboi's made me hate my own car. :shrug:



But I had a point.. haha.

Also.. I'm more expensive than that..


Tis true, I paid way more than 50 bucks :wub:

[RCKSTR]

Used aps front mount kits can be found.


I love the way your kit looks. its just so right...

[Berge56]

Thanks buddy..... I will keep my eye out on the interwebz for ya.

[RCKSTR]

:wub: I'm gonna be ready for the drag racing season...

http://www.accessecu.com/support/docs/tutorials/Subaru_LC-FFS_FAQ.pdf

[Berge56]

oh god start saving for a transmission.

[RCKSTR]

oh god start saving for a transmission.

mines one of those magical transmissions... it'll never break... :hide: :troll:

I'm debating on selling the nissan to pay for a 6 speed swap... its sad when I put that into words :lol:

[Berge56]

No it's not..... do it!

[bigd_wright]

NO BALLS...YOU WON'T...

[bigd_wright]

Man you have an obsession...But at least it's a great one to have!

[RCKSTR]

Man you have an obsession...But at least it's a great one to have!

I do I know, whenever I say I'm leaving it alone... BAM I buy more **** :palm:

[Nemesis]

I do I know, whenever I say I'm leaving it alone... BAM I buy more **** :palm:

suckerrrrrr

[yaya]

I am familiar with this problem. :troll:

[RCKSTR]

I am familiar with this problem. :troll:

Yes, yes you are :lol:

[Berge56]

We are all a bad influence?

[RCKSTR]

Welp my AP is at the Post Office :unamused: but hopefully I've got a APS 725 lined up thanks to da berge :berge:

[Berge56]

:D

[Seraphinwolf]

Sooo... are you gonna convert to 06+ WRX or 04'+ STi to run speed density?

[RCKSTR]

Sooo... are you gonna convert to 06+ WRX or 04'+ STi to run speed density?

I'm not really sure what you're talking about... :lol:

[Seraphinwolf]

Speed density needs a MAP sensor. Pre-06's are sans MAP, no?

[jwebsta32]

Sooo... are you gonna convert to 06+ WRX or 04'+ STi to run speed density?

I'm not really sure what you're talking about... :lol:

no hes not

[RCKSTR]

Speed density needs a MAP sensor. Pre-06's are sans MAP, no?


why would I do that swap?

[RCKSTR]

no hes not

This

[jwebsta32]

why would I do that swap?

because race car

[RCKSTR]

I still don't get it :hide: because Cobb AccessPort for 02-05 wrx that now has the LC function available...

[Berge56]

:lol: Plus you can switch maps on the fly.

[06ImprezaWRXSTi]

Just a random question, is there anyway that you can copy the cobb maps so I can flash with my laptop using ecuFlash?

[yaya]

I still don't get it :hide: because Cobb AccessPort for 02-05 wrx that now has the LC function available...

He's talking about speed density, not LC.

[Seraphinwolf]

Just a random question, is there anyway that you can copy the cobb maps so I can flash with my laptop using ecuFlash?

Nope. There should be plenty of basemaps floating around to get you started. I got a chance to hop in on a dyno tuning session and get a short crash course last week at the shop. All the adjustments we made was pointed out that if we were open sourcing the tune every adjustment would need to completely go through reflash process with the ECU. I'm really sold on the idea of AP's with tuning.

[My Name]

Nope. There should be plenty of basemaps floating around to get you started. I got a chance to hop in on a dyno tuning session and get a short crash course last week at the shop. All the adjustments we made was pointed out that if we were open sourcing the tune every adjustment would need to completely go through reflash process with the ECU. I'm really sold on the idea of AP's with tuning.


+1 on AP way of tuning. Been around to see both ways get done I would get a reflash process for something basic and planed on keeping it that way for a while.

[My Name]

some APS FMIC FS here

http://forums.nasioc.com/forums/showthread.php?t=2303115

[Berge56]

Lots of great part in that thread. Justin buy that FMIC!

[RCKSTR]

He's got the boost solenoid I want too... I'm talking with him now.

Thanks for the link My Name :up:

[Berge56]

Nice! Keep us posted on what you get.

[RCKSTR]

Went to the post office to pick up my AP that came in from Texas, tried it and it works :)

that's always good :lol: almost ready for install day... Still tryingto decide on a few things...

[Berge56]

YEA BUDDY!

[hiprsha666]

Working parts are a plus.

[yaya]

:RCKSTR:

[bigd_wright]

Ballin!!

[My Name]

mmm-- more-- LC. Now lets keep the gears in one piece.

[RCKSTR]

mmm-- more-- LC. Now lets keep the gears in one piece.

That's my game plan :lol:

[RCKSTR]

update:

http://i59.photobucket.com/albums/g297/sh8kspeer/cobb.jpg

[arcadia25]

Ooooooo fancy

[Berge56]

Yes indeed! So when will you have other parts in your possession?

[RCKSTR]

Yes indeed! So when will you have other parts in your possession?

Sent payment today and he said he'd ship next day once payment is recieved so... maybe I'll have it monday?

Powdercoating the pipes ftw :spin:

[RCKSTR]

Mine :wub:

http://i59.photobucket.com/albums/g297/sh8kspeer/apsfmic1.jpg

These will be going to the powdercoater as soon as I recieve them... also having them weld up the meth hole since I'm not planning on meth just yet.

http://i59.photobucket.com/albums/g297/sh8kspeer/apsfmic2.jpg

[My Name]

Mine :wub:

http://i59.photobucket.com/albums/g297/sh8kspeer/apsfmic1.jpg

These will be going to the powdercoater as soon as I recieve them... also having them weld up the meth hole since I'm not planning on meth just yet.

http://i59.photobucket.com/albums/g297/sh8kspeer/apsfmic2.jpg

NIce. Keeping the same colors?

I want the turbo he has for sale but I don't have the $.

[RCKSTR]

NIce. Keeping the same colors?

I want the turbo he has for sale but I don't have the $.

I'm thinking black with a pearl in it :) I want that turbo too but don't have the money or motor... :lol:

The APS fmic come with all the pipes, hose/bov adaptor, couplers, clamps, beam, ect... And I am getting the Grimmspeed ebcs aswell. yes for the 16bit ecu

I've decided to change up everything because I'd like name brand parts this time round and so far I'm happy with my purchases :spin:

After my tune I will go back to the Exterior of the car. Painting the fenders, getting a roof vent, cusco front lip and some sort of aftermarket rear air diffuser...

[Berge56]

Sweet! Do you have a guy that can weld that hole up?

[RCKSTR]

Sweet! Do you have a guy that can weld that hole up?

Yeah I do, one of my customers up here said he could take care of that no problem :)

[DHGurs]

Yeah I do, one of my customers up here said he could take care of that no problem :)

jmb3m?

[hiprsha666]

jmb3m?

Mind blown

[RCKSTR]

:palm: no I wouldn't let b3m near a toy welder let alone a real one...

stupid bubblegum weld'n hackmother****er...

[Berge56]

haha good!

[RCKSTR]

Welp tomorrow is going to be a long day, taking the decals off the doors... been on there for around 2 years I think... wonder how long its going to take for me to make it not look faded... should be interesting.

Also thinking of re-wetsanding the headlights and spraying them with clearcoat... :troll:

[Seraphinwolf]

I'm thinking black with a pearl in it :) I want that turbo too but don't have the money or motor... :lol:

The APS fmic come with all the pipes, hose/bov adaptor, couplers, clamps, beam, ect... And I am getting the Grimmspeed ebcs aswell. yes for the 16bit ecu

I've decided to change up everything because I'd like name brand parts this time round and so far I'm happy with my purchases :spin:

After my tune I will go back to the Exterior of the car. Painting the fenders, getting a roof vent, cusco front lip and some sort of aftermarket rear air diffuser...

Taking away all the fun...

[RCKSTR]

making it easy this time round... I'm still trying to justify what I'm doing to the subaru. I spent alot more $$ than I thought I was going to this time :lol:

[RCKSTR]

UPS delivery update:

Scheduled Delivery:Monday, 02/06/2012, By End of Day
Good thing I have a 3 day weekend :troll:

[RCKSTR]

Door decals are off, 2nd coat of wax is on now, things are going better than expected :)

[RCKSTR]

Washed the car first (but had to still drive up my gramps driveway that is a mile long with dirt/mud...)

http://i59.photobucket.com/albums/g297/sh8kspeer/wax3.jpg

Went to town with a heatgun...

http://i59.photobucket.com/albums/g297/sh8kspeer/wax2.jpg

then did a few coats of turtle wax :)

http://i59.photobucket.com/albums/g297/sh8kspeer/wax.jpg

Ended up going extreemely smooth, way better than expected. I can't see where the vinyl used to be even though it has been on there for 2 years :D

Next is painting the fenders! sometime...

[Psychoreo]

You got lucky with the fading (or lack there of!) looks good.

[arcadia25]

Im proud of you :) :up:

[Berge56]

Looks great Justin!

[Berge56]

Looks great Justin!

[RCKSTR]

Thanks! I'm happy with it, you can't even tell they were there.

Now the whole car needs a wax and also a cleaning in the interior... It's bad...

Still searching fuel rail options, there aren't many out there. Also I'm still unsure of which injectors to go with. I came across a chart by DW that said my injectors should flow for 280hp but I'd feel more comfortable with atleast 650cc for room to grow.

Those are the last two bit that I can think of for my setup to be complete.

[Berge56]

I had helix 660's when I ran it on my 2.0. I don't remember what my injector duty cycle was but I would get 650's or 750's if it were me.

[RCKSTR]

Pete said I'd be fine with oem rails but I'm still considering aftermarket for looks... :hide:

I've decided on 750cc injectors so I've got room to grow if I upgrade the turbo down the road... :hide:

And the ups man just dropped off gifts... :hide:

APS front mount intercooler & Grimmspeed boost controll solenoid... :troll:

http://i59.photobucket.com/albums/g297/sh8kspeer/APSFMIC.jpg

[hiprsha666]

Nice. What are you going to do with the pipes, they look like they need some love?

[Berge56]

:ay:


Can't wait to get this installed!

[Simple Skillz]

We all can't wait for that install :)

[RCKSTR]

Nice. What are you going to do with the pipes, they look like they need some love?

Yesh the pipes do need some love, they're going in to be powdercoated hopefully by the end of the week along with getting the hole for meth welded closed. I'm thinking of just a black with some pearl or flake but am open to suggestions...

:ay:


Can't wait to get this installed!

I'm excited, I've wanted this fmic setup for years... all in all the car should feel pretty quick :wub:

[hiprsha666]

The black will be classy.

[RCKSTR]

The black will be classy.

Yeah I think I'm going to stay with the ex-wife theme for my car. Cuz you know I'm all about being classy.

[hiprsha666]

You could also go and look through the books and samples and pick something crazy.

[RCKSTR]

You could also go and look through the books and samples and pick something crazy.

I was thinking of HKS purple but I don't have anything from HKS so yeah... :lol:

[Shiux]

Hook me up with your old FMIC buddy ol' pal? :)

That APS FMIC is going to look sooooo good! How much did you end up getting it shipped for, if you don't mind me asking?

[yaya]

http://i59.photobucket.com/albums/g297/sh8kspeer/wax2.jpg

Next is painting the fenders! sometime...

You need some WRB sideskirts!

[Berge56]

:lol:

[yaya]

:troll:

[RCKSTR]

:hide:

[Berge56]

I has a turbo for you!

[RCKSTR]

I has a turbo for you!

:troll:

install is soooooon then, just need injectors now. Selling stuff to help this along faster :lol:

[Nemesis]

I has a turbo for you!

it looks like
http://i3.photobucket.com/albums/y95/Nemesis_Photo/1de899ed.jpg

[RCKSTR]

Daddy likes :berge:

[Seraphinwolf]

Not big enough!

[hiprsha666]

Looks big enough to me

[RCKSTR]

Its big enough for my stock 5 speed :rofl:

[Berge56]

and 2.0.

[RCKSTR]

and 2.0. :truestory:

[RCKSTR]

Install date finally semi planned so thats exciting :D I can't wait to drive this thing with the EWG, 18g and the APS front mount :troll:

Going to be soooo much fun :spin:

decided that the intercooler pipes will be powdercoated at a later date just so I can get this **** done!

[Berge56]

YEA BUDDY!

[hiprsha666]

When you shooting to have it all on?

[RCKSTR]

March 31st :troll:

[Berge56]

I'll keep your turbo nice and safe until then.

[RCKSTR]

I'll keep your turbo nice and safe until then.

please be sure to tuck it in at night!

[Berge56]

Will go do that meow.

[RCKSTR]

Will go do that meow.

Thanks!!!

[RCKSTR]

sooo still asking around for someone who can weld the pipe, till I find someone I am just plugging the hole and sealing it with a brass piece. its threaded anyways from the meth nozzle so **** it.

Installing the fmic on easter maybe along with reinstalling the blue fenders so the black ones can get painted propperly.

Trying to clean up the car somewhat for the upcoming car shows... :hide:

[Shiux]

And then i can have your old fmic for $free.99, right? :D

[Berge56]

I know a guy that can plug that hole up for you Justin.

[06ImprezaWRXSTi]

A machine shop should be able to plug that up for you.

[Berge56]

Oh and paint your mirrors black!

[RCKSTR]

They will go black too, I never thought of that!

[yaya]

They will go black too, I never thought of that!

:seriously:

[yaya]

I like it, but you should paint the fenders/sideskirts. And maybe black mirrors too.

[06ImprezaWRXSTi]

Lol. Might as well just paint the entire car black :)

[Berge56]

Sideskirts will be done as soon as Justin makes time to meet up!

[Shiux]

I know a guy that can plug that hole up for you Justin.

:troll:

[RCKSTR]

****... Yaya I'm sorry :hide:

[RCKSTR]

LOTS OF PARTS FOR SALE SOON... :troll:

[Nemesis]

o yeahhhhh???

[RCKSTR]

some of the parts may or may not even be getting installed on said project: no rice :hide:

[Nemesis]

go on....

[RCKSTR]

Installing fmic tomorrow possibly... other parts not so much...

[Nemesis]

ooooooooooooo...... you need to finish this for now i want to photograph it

[RCKSTR]

ooooooooooooo...... you need to finish this for now i want to photograph it

after fenders and fmic are fixed (hopefully this weekend) I will be good to go kind sir :up:

[RCKSTR]

Going to also reinstall the lip I think. its had a rough life but I think it has another season in her :P

[Nemesis]

after fenders and fmic are fixed (hopefully this weekend) I will be good to go kind sir :up:

sweeeeeeeeetttttttttt

[RCKSTR]

Taking my side skirts off tonight... :troll: more JDM hotness is coming my way too... :yaya:

[yaya]

:yaya:

[Berge56]

woot!

[RCKSTR]

Well I did alot more than I was planning on... all because of being bored :lol:

[RCKSTR]

Skirtless...

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857650.jpg

Since I took the skirts off for my new parts I decided to move on with a few other things...

before:

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857653.jpg

during:

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857655.jpg

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857661.jpg

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857664.jpg

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857699.jpg

mounted!!!

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857702.jpg

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857704.jpg

pipes...

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857706.jpg

and done.

http://i59.photobucket.com/albums/g297/sh8kspeer/1333857708.jpg

issues I had were few, broke a fender bolt, had issues mounting the beam/core but finally did it, my air filter was too big so I had to use the old one that came with the intake (temp fix...), and I think thats about it. pipes are kinda snug so I'll have to adjust them but all in all I'm very happy :)

[pj2002wrx]

Wow looks good

[bigd_wright]

That fits like a glove!! Nice work homie!!:up:

[My25RSL]

:mog:


that things ****ing HUGE...

[Shiux]

Yay! Now i can have your old fmic for freeeee :)

[RCKSTR]

Wow looks good

thanks :)

That fits like a glove!! Nice work homie!!:up:

fitment needs some work but it's in there for now!

:mog:


that things ****ing HUGE...

I know, the before and after pics are insane... :lol:

[bigd_wright]

Yay! Now i can have your old fmic for freeeee :)

Kenny, you might as well give up...because ur not getting it for free or...at all for that matter...

[RCKSTR]

He can buy it if he'd like too :)

all the pics I took last night will be the ones used in the fs thread whenever I get around to posting it up. $200 and it's sold to whoever!

There's overspray from the bodyshop, on a few pipes and the side of the core but not noticeable IMO.

[Berge56]

My twinn! Looks good!

[RCKSTR]

My twinn! Looks good!

mine must be the uglier twin :lol:

Today I met up with yaya and got me some jdm bits along with painted skirts :D They will mostlikely be going on tomorrow after work since I'll have to get some 3m tape for the jdm pieces.

also talked about a few more ideas, some things that may or may not happen. we shall see how it goes

[RCKSTR]

http://i59.photobucket.com/albums/g297/sh8kspeer/projectnorice.jpg

today after the wash :)

[pj2002wrx]

Looks good

[jbpsubie04]

JDM fogs :unamused::(

[yaya]

Hurry up and install those goodies!

[Berge56]

Looks sooo much better with WRB fenders.

[arcadia25]

Ooooooo.....so prettyyyy

[bratman18]

That looks great!

[97legacygt]

http://i59.photobucket.com/albums/g297/sh8kspeer/projectnorice.jpg

today after the wash :)

Burtons touchless in bratt? I take the long way home and go there at least once a week after work :lol:

[yaya]

Looks sooo much better with WRB fenders.

Those are the old fenders while the black ones get painted.

[Berge56]

I know bro.

[Nemesis]

he is " Just Saying"

[RCKSTR]

I can't wait to install them!!! And the JDM bits!!!!!!!

Must get 3m tape so I can install the parts :spin:

I ended up going shooting and releaving some stress :lol:

[uncivil_wrx]

i have tons of 3m tape come visit me and get some lol its only a short 2 hr drive ;) plus i wanna see ur car up close saw it from afar at import face off

[Berge56]

Do it tomorrow!

[RCKSTR]

i have tons of 3m tape come visit me and get some lol its only a short 2 hr drive ;) plus i wanna see ur car up close saw it from afar at import face off

I'm getting it from my work, I work at Bond auto :lol: sorry I don't think I'll make the trip... :hide:

:lol: if you go to WBM you'll be able to see it up close ;)

Do it tomorrow!

I am! I'm out at 4 so I'll have plenty of time :D

[Berge56]

Can't wait for pics!

[squeethebee]

Can't wait for licks!

ed

[RCKSTR]

Installed :D

http://i59.photobucket.com/albums/g297/sh8kspeer/1334014473.jpg

http://i59.photobucket.com/albums/g297/sh8kspeer/1334014477.jpg

Now I just need a Cusco front lip, the jdm rear bumper spats and a rear diffuser and I'll be all done with the body stuff :p

[bigd_wright]

Looks awesome mang!! Now get those NON-dented fenders painted and installed!!lol

[squeethebee]

Yeah, looks good.

ed

[SF5boost]

wow looks alot better justin. great work. hope mines done soon

[Nemesis]

You should do a old skirt vs new skirt set of photos

[RCKSTR]

Old:

http://i59.photobucket.com/albums/g297/sh8kspeer/weenur.jpg

New:

http://i59.photobucket.com/albums/g297/sh8kspeer/1334014473.jpg


Win?!?

[Nemesis]

need spats... rear under spoiler

[arcadia25]

Sexy

[RCKSTR]

need spats... rear under spoiler

I posted that already! its true :sadpanda:

[Nemesis]

sorry i just saw pretty photos...

[Psychoreo]

Looks better skirtless :hide:

[RCKSTR]

Sexy

Thanks :cool: I hope to one day be finished. I'm getting closer thanks to yaya and all his cool parts that he doesn't want anymore :yaya:

Between Berge and I, I think we could almost build a whole other WRX from yaya's old parts that we picked up :rofl:

[RCKSTR]

Looks better skirtless :hide:
you still looking for skirts?

[Nemesis]

Thanks :cool: I hope to one day be finished. I'm getting closer thanks to yaya and all his cool parts that he doesn't want anymore :yaya:

Between Berge and I, I think we could almost build a whole other WRX from yaya's old parts that we picked up :rofl:

do itttt!!! and call it yaya jdm crap he dont want any more

[RCKSTR]

but we are both using the parts I mentioned...

[Nemesis]

you could take the parts you take of your 2 cars and make a OEM one...then

[RCKSTR]

those parts are long gone :lol:

[Nemesis]

pitty could of made one cool OEM car

[RCKSTR]

If we had, the oem parts would have been upgraded anyways :lol:

I'm still undecided as to what route I should take with my car. the exterior is coming along nicely though :) got to do a full on detail of the engine bay, wax the exterior, and also go through the interior... its been a long and untouched winter for this car :sadpanda:

[yaya]

:lol:






:like:

[Berge56]

Looks good Justin. Take your damn winter wheels off!

[yaya]

When will the fenders be painted? Also, put your lip back on.

[RCKSTR]

Looks good Justin. Take your damn winter wheels off!
I don't have a different set...
When will the fenders be painted? Also, put your lip back on.
soon and yes I know :lol:

[RCKSTR]

From today, almost ready for a proper photoshoot... :spin:

http://i59.photobucket.com/albums/g297/sh8kspeer/sears.jpg

[arcadia25]

Looking good...mirrors should get some black....

[RCKSTR]

Dan actually reminded me that I do have a set of black mirrors :lol: I'll swap those out this weekend along with installing the lip and hopefully fix up the hazed headlights with a wetsand and clearcoat... get'n my **** ready for UMASS :spin:

[RCKSTR]

I also need to do something about the licence plate, I hate the way it looks... just looks out of place. maybe I'll just take it off... :hide: **** it right

[Nemesis]

:orly:

From today, almost ready for a proper photoshoot... :spin:

http://i59.photobucket.com/albums/g297/sh8kspeer/sears.jpg

[arcadia25]

Dan actually reminded me that I do have a set of black mirrors :lol: I'll swap those out this weekend along with installing the lip and hopefully fix up the hazed headlights with a wetsand and clearcoat... get'n my **** ready for UMASS :spin:

Saweeeeeeeeet!!!! Im trying to get my **** done too. Should be good though

[97legacygt]

I also need to do something about the licence plate, I hate the way it looks... just looks out of place. maybe I'll just take it off... :hide: **** it right
mount that **** on the roof, standing straight up. There's a mod no one else has done :lol:

[My25RSL]

i got pulled over and given a warning for having my license plate on my roof rack. the cop tried telling me it was "plate misuse"....

and then i got a ticket for laying it down on the front bumper...

:unamused:

[arcadia25]

If its not in the same place as it was from the factory tis illegal

[Shiux]

This is true.