PDA

View Full Version : Sandwich Adapters Suck!

etaks99rs
04-13-2009, 11:56 AM
So after changing my oil 2 times to fix leaks in my sandwich adapter, I have decided it is time to remove said adapter and toss it in the garbage. I have been looking into the galley plug route but any suggestions or help would be much appreciated. I have been searching on nasioc and scoobymods all morning and haven't found a whole lot of info on what I need.
-=The Boss=-
04-13-2009, 12:19 PM
What are you trying to do? Have a remote oil cooler?
etaks99rs
04-13-2009, 12:25 PM
oil pressure sender to my gauge.
Robk0000
04-15-2009, 04:11 PM
you may just be better off taping the block, its alot of work, but its the best way to get it to work 100%.
etaks99rs
04-16-2009, 09:22 AM
I can use the spot where the stock low oil pressure sensor is underneath the alternator. It should fit right in there and I wont have to change my oil to get to it...(just to take the damn adapter off)
Bombay994
04-16-2009, 10:10 AM
should help:
http://www.scoobymods.com/forums/oil_pressure_gauge-t360.html?t=360
http://www.wrxtra.com/Documentation/doc-1004.pdf
http://forums.nasioc.com/forums/showthread.php?t=1253467

thats the way i did mine, it works great and wasn't much hassle

Brad
etaks99rs
04-27-2009, 11:51 AM
sweet thanks!
Seraphinwolf
04-28-2009, 07:45 AM
Okay then give me the sandwich! I'll put it to good use.
-Gaddis
jonny-rockets
04-28-2009, 08:22 AM
that's gay. i tried to put my sandwich adapter in once, but there were flanges and **** that needed to be bent out of the way. didn't have time to do it all.

little bastard prosport rep i talked with on the phone "yeah it just slides right up in there".

douche.

if i have problems with mine leaking i'll have to find that dude and donkey punch him.
Bombay994
04-28-2009, 01:05 PM
if i have problems with mine leaking i'll have to find that dude and donkey punch him.


Thats the reason i didn't use mine, after all the heat shield and oil cooler mods to get it to fit it leaked.............:unamused::unamused:

< has a spare sandwhich adapter thats better used as a coaster
etaks99rs
04-28-2009, 04:20 PM
If anyone wants to try the one I have let me know... $10 its yours.
Seraphinwolf
04-30-2009, 07:15 AM
If anyone wants to try the one I have let me know... $10 its yours.
I'll let you know. I actually think the EZ30R has something for feeds already but it's been so long since I've un burried my engine in the garage to look at it. :( I need to get moving on this.
-Gaddis